Thanks Jay. You the man! I Did as you requested and it worked. I got out my old exacto knife and scraped the surface between traces near C432, turn the set on with a full screen. Everything else checked ok .This set is on its way back home. Thanks again Jay and all, GOW TV Service gomdwil@xxxxxxx In a message dated Fri, 12 Oct 2001 10:28:41 AM Eastern Daylight Time, Administrator <admin@xxxxxxxxxxxxxxx> writes: > > When c432 opens most of the time the pcb on the solder side will turn > dark brown from the heat generated in the circuit. Take a exacto knife or > similar tool and scrape off the dark brown surface between the traces near > c432. I have had about 5 of these over the past few years and that has > fixed them all . But not after hours of frustration the first time. Let me > know if it works for you. Jay > > > At 11:46 PM 10/11/01 -0400, you wrote: > >Hello All' > >Magnavox TV > >Mod. # TR2510 C101 > >Ch. # 25E501 > >This set came in with a common problem, C432 opened. I replaced it, checked > >B+,it was at 130V. Turned the set on to see the right side of screen solid > >black, left side prefect picture. Sound OK. The black last about 15 minutes > >and gradually moves to right side until it disapear and it will play all day > >OK. Thanks for any help. > > > >Gomdwil@xxxxxxx > >GOW TV Service > > > > > >Help make your TechAssist online repair tips > >database better! Submit your fixes here: > >http://www.circuitwork.com/techassist/tip/#tips > >To unsubscribe write to: > >techassist-request@xxxxxxxxxxxxx > >with unsubscribe in the subject line. > > J. Knoll Administration http://tech-assist.org > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.