I have a partial schematic for the set. 96 volts is correct for B+. Max Bonnell Bonnell TV Robinson, IL Sender: techassist-bounce@xxxxxxxxxxxxx From: ampm@xxxxxxx(al=A0m) Date: Mon, Jan 10, 2005, 8:22pm (CST+1) To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: ***SPAMTAGPTD: Magnavox 20MS233S chassis 20J8 No sync Reply=A0to: techassist@xxxxxxxxxxxxx Don't think 96V is correct for the B+. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "John at Main TV" <maintv2004@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, January 10, 2005 8:11 PM Subject: ***SPAMTAGPTD: [TechAssist] Magnavox 20MS233S chassis 20J8 No sync I have this Magnavox 20" made in 2003 that does not have horiz or vertical sync using either tuner or A/V. The horiz frequency does not seem to be too far off but does not lock. The OSD is normal except for a slight weave. The B+ to the horiz stage is +96 volts. I do not have the service manual. Has anyone seen this? Also, how do you enter the service manual if it has one. (I have the original remote). Could someone upload the service manual for this set. TIA, John. John Mielke Main TV 636 main St. Longmont, Co phone 303 776 6955 fax 303 776 0792 maintv2004@xxxxxxxxxxx ---------------------------------------------- ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/