Check the surface mount electrolytics on the evf pcb. Jerry Silverman Greentron Inc 4 Newland Ave Greenville SC 29609 Fax/Phone 864 232 3889 greentron@xxxxxxx ----- Original Message ----- From: "Robinson Electronics" <RobinsonElectronics@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, June 21, 2005 3:57 PM Subject: [TechAssist] Maganvox Camcorder Model CVM310 V01. No, or intermittent video in "evf", with retrace lines. > This is an older VHF camcorder unit, hoping someone can help us with? > When I power it on (in camera mode), I had video for about 20 sec., then just a lighted display with retrace lines, no video or osd at all. Sound ok. > Same symptoms when playing back recorded tapes. > Has anyone seen this before on these models, or have any info to share. Thanks. David. > Robinson Electronics > 1075 Sweeten Creek Road > Asheville, NC 28803 > Ph./Fax. 828 274-3787 > Toll Free. 1-888 ROBELECT > www.robinsonelectronics.com > www.robelect.com > Mailto: RobinsonElectronics@xxxxxxxxxxx > > -------------------------------------------------------------------------- --- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/