Make : Apple/Mac Model : M3705 Problem : Repeat failure of QP1 This was the notes from our first time working on this : QP1 Shorted in primary of the SMPS. Original was a SSP5N80. Replaced with a SSP5N90 ( 5 amp / 900V). Also found CP67 (22uf/35) leaking and CL87 (2.2uf/250V) leaking & very high ESR. Black residue on traces. The SSP5N90 was recommended to me as a higher voltage (900v?) Is there any reason why this part would NOT be a good sub in this monitor. We ran the monitor for 24 hours at the shop & no problems....customer uses it for a few days and it's back! We've ESR'd and checked all components in that area......any suggestions / Tips? Jeff Stielau Shoreline Electronics Repair 125 Beechtree Lane Westbrook,CT 06498 860-399-1861 Voice 860-664-3535 Fax jstielau@xxxxxxxx Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.