Ian, From Tech Repair CD: SONY\KV27XBR10\PINCUSHION DISTORTION\\\\ON *A* BOARD L501* R571 OPEN & Q505 SHORTED D512 DAMPER\\\\\\\\ Jeff -- Intrepid Video TV/VCR Repair 263 S Front St, Steelton PA 17113 717-939-7708; (F) 717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "Ian Scott" <service.depot@xxxxxxxxxxx> To: "Techassist" <techassist@xxxxxxxxxxxxx> Sent: Wednesday, November 24, 2004 11:35 AM Subject: [TechAssist] KV32XBR10-Dead,replaced parts. L501 getting hot Hello, this set came in dead. We replaced HOT Q503 with 2SC4927 (as advised by Sony bulletin) and replaced R523 with a .33 ohm resistor. L501(7.5mH coil) was burnt, we replaced it and also R571(3.3ohm 1W) and Q505(2sc3298) (as advised by Sony). We also found R518(4.7ohm 1/2W) open and replaced it. We checked for bad solder connections in the area and soldered poor ones. TV is working now with good picture but L501 is still getting too hot. Any help appreciated! Ian Scott Service Depot 252 Lasalle Blvd. Sudbury, ON P3A 1W6 705-566-3557 Fax 705-566-3455 ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/