Jeff, There may be a leaky 1000 pf ceramic cap on the G2 line(CRT board) causing the drift. Dominic DiLeo Atlantic TV Freeport, Maine ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In a message dated 8/18/04 1:02:17 PM Eastern Daylight Time, jstielau@xxxxxxxx writes: << Make : JVC Model : AV36260 Problem : Set was coming on OK but would immediately go to bright white washed out image then shut down. Apparently the G2 setting on the flyback had drifted grossly enough to cause this as we turned down the G2 control and the fired the set up , the readjusted. Customer said set was fine one day then the next morning exhibited this problem. Just curious if anyone else has seen the G2 drift this much on these newer JVC models? If so , did the basic readjustment prove to be long lasting fix? ========================== Jeff Stielau Shoreline Electronics Repair 344 East Main Street Clinton,CT 06413 860-399-1861 860-664-3535 (fax) jstielau@xxxxxxxx ======================== >> ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/