Hi Techs, I am working on this chassis that has an intermittent vertical sweep problem. It doesn't seem to respond to tapping on the board (like a solder connection) but I have carefully resoldered the vertical section as well as replaced the vertical IC and C423/C424. I am getting about 26v on pin 6 of the IC (Vcc) but only about 1.4v on pin 3 (power for vertical deflection output). Can some kind soul tell me what this pin should read and where the source for this voltage is? Or better yet upload the schematic to Techassist where I can download it. Any help would be greatly appreciated. Mark Osburn J.M. Audio Video Repair 3701 Carthage street Fort Smith, Arkansas 72903 josbu@xxxxxxxxxxxxxxxx ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/