Did you check if this set has a speaker switch in the back near the cable input? I just finished a JVC AC-20CM3 that had no sound. I jiggled the speaker switch and the sound came back. I,ll probably replace the switch. I think the wife was dusting the back of the set and accidently hit the switch. Hope this helps. FERNAND GOGUEN GOGUEN TV SERVICE ----- Original Message ----- From: "sterling pasher" <spasher@xxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, October 13, 2001 7:36 AM Subject: [TechAssist] JVC AN-3151S (GYChassis) > > Guys: I have a JVC AN-3151S with nary a bit of sound. I'm in bad need of > a schematic of the sound section.Usually I can fix with the help NTE (old > ECG)cross reference manual but none of the components are crossed. Checked > with Sams but they don't have it and it will take 2-3 weeks to get from JVC > (I do their warrarty in Gander) If it is still available. It is a GY > chassis. > > Thanks > for any help > > Buck > Buck's > T.V. Service > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.