I've posted twice before on this subject and I now have news from Thomson. The ChipperCheck program it's self shows that this chassis must be accessed by the ethernet connection. It must be a "crossover" cable The latest manual states in 4 places on the first page alone that ChipperCheck "is, required, reccemmended, must, be used to align this chassis. I found that impossible to do, trying three different computers and three different operating systems. After waiting 3 days for a reply from thomson tech support, I am informed that the "adaptors" are not manufactured yet, and are not available. So, I guess I'm supposed to try and adjust all two of the things that I can manually(according to the manual, basic geometry, and color temp) even though it's not reccommended. That leaves all the convergence adjustments which really can be done like other thomson sets, but is not reccommended. What a crock!!! Walter ===== Walter Wood Future Tech Home Center 2786 Hwy. 43 N. Lawrenceburg Tn. 38464 931-829-3337 Fax 931-829-4044 mailto:wwood_38478@xxxxxxxxx __________________________________ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com ***************************************************************************** CHECK OUT THE NEW CHATROOM! Just login and click on chat! http://www.tech-assist.org/secure/tip/main.htm The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/