Does that have the"majic focus" button on the front, behind the door? If so just hit it and let it go.If not there is a switch on the main board and you have to use the remote and make adjustments.LOOK for the majic focus button ----- Original Message ----- From: "Jim Myers" <jr.myers@xxxxxxxxxxx> To: "Techassist" <techassist@xxxxxxxxxxxxx> Sent: Thursday, November 17, 2005 2:20 PM Subject: [TechAssist] Hitachi model 53UWX10BA touch uo convergence after replacing STK's >I don't find a convergence option in the customer menus and the > convergence procedure in the service manual seems to start with Adam and > Eve and goes all the way to the end of time. Is there a simple way to > just touch up the blue? Red and green look ok. > -- > > The Old Master Technician > ******************************** > Since 1972 * > Jim Myers * > Telrad Electronics * > Fort Wayne Indiana * > ******************************** > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search > engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation > mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/