[TechAssist] Re: Hitachi model 26ax10bc ch m1clux-h (vertical jitter)
- From: "Gemini Computer & TV" <geminitv@xxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 9 May 2002 07:25:33 -0400
Does this set have D752 and D753? If so, check those.
Bob Waterman, CET®
Service Manager
Gemini Computer, TV, & Security Alarm Systems, Inc.
(508)695-7302
(508)695-7769 FAX
geminitv@xxxxxxxxxxxxxxxx
geminitv@xxxxxxx
----- Original Message -----
From: "don trippel" <dtrippel@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, May 09, 2002 2:27 AM
Subject: [TechAssist] Hitachi model 26ax10bc ch m1clux-h (vertical jitter)
>
> Hello
>
> I am working on a Hitachi model 26ax10bc . The set has vertical
> foldover and vertical jitter for about 20 minutes on startup. I have
> checked all the usual caps in the circuit , in fact I have changed every
> cap in the vertical circuit. Vcc is normal . After symptom has cleared
> up I have tried freezing circuit with no response. I have wasted alot of
> time on what is usually an easy fix, this one has me stumped. Any
> advice would be appreciated. Thanks !
>
> Don Trippel
> Don's Electronics
> Rosthern, Saskatchewan
> Canada
>
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
>
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
