[TechAssist] Re: Help on Denon Amp
- From: <info@xxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sun, 27 Jan 2002 10:07:11 -0600
What's the problem? A reply to a post without the original
post is useless. Some just refuse to read the guidelines.
PLEASE make a note of our few posting guidelines below &
FAQ's, as well as information on how to make this list
work better for you. (AOL MEMBERS especially read!!)
Please see the update at the bottom regarding
modifications implemented to the server to make the list
the SAFEST email list around!
Guidelines: (of which most are just common sense ;-)
1. Please include ALL PREVIOUS TEXT of an email thread
when you reply to a post. A reply without the original
post is useless. This means the original post, and all
replies (if more than one) that have been sent to a
specific post. In short, just click "reply" and BE SURE
ALL OF THE TEXT is in YOUR REPLY that was in the
post you are replying to. This way, ALL members can
read any reply to post and get an immediate history of
all replies up to that point, as well as the original
problem. (See #6 below).
TechAssist Administration
http://tech-assist.org
techassist@xxxxxxxxxxxxx
(PLEASE include our previous correspondence
if replying to this email!!)
----- Original Message -----
From: <OGARONEILL@xxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Sunday, January 27, 2002 9:52 AM
Subject: [TechAssist] Re: Help on Denon Amp
There are two 1ohm 1/2 watt resistors in the protect circut
that either open
up or increase in value. the number is r 1404 / 1403 (im not
sure?) There
physcal location is (looking at front of unit) to the far
right of the
pcb..not by the outputs..increase the wattage to 1 watt and
youll never have
a recall.. ps i can be fixed w/o removing the pcb just locate
res. clip and
replace from the top... good luck
Rick Oneill electroncis
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
