[TechAssist] Re: HELP-HYUNDAI HL-2882 monitor
- From: "DOCVIDEO" <DOCVIDEO@xxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 11 Oct 2001 18:31:02 -0700
Make sure to turn main PCB over and re-soldered bad connections. I always start
with
this then go from there. Since monitors run hotter than TV's it is a good place
to
begin, also make sure the pins on main cable are not loose or bent.
MONTE MONCRIEF
BAKERSFIELD, CA.
DOCVIDEO@xxxxxxxxxx
----- Original Message -----
From: "bob" <bob_whigt@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, October 11, 2001 7:13 PM
Subject: [TechAssist] HELP-HYUNDAI HL-2882 monitor
Hey guys
Any data ,faults on this monitor HYUNDAI HL-2882 sometimes when power on
has no video,has retrace lines.Then turn off back on sometimes will be ok,
tapped around p.s ok.any help would be appreciated thanks in
advance........bob have a great day
ELECTRON WORLD
GUTHRIE KY
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
