Here's an email from my archives I found about an intermittant video loss in a ctc203(had HV OK): "Thanks to all and thanks Hollis I tracked it down to the PIP board removed it and placed it under a large magnifier and still couldn't see any brakes but elected to start in one corner and hit every solder joint on the board replaced it and its be playing five hr. with no problem..." HTH, Phil Bader Alvin Rose wrote: >Hi Guys >We have a CTC-203AA9 chassis with no video..In the video audio mode.. >the sound is ok but on the screen it says unusable signal..Checked the >coil L14401 but it is not unsoldered and can find no bad solder joints >Any help would be appreciated >Alvin Rose >Radio & Tv Centre >Marystown, Nl > > > >----------------------------------------------------------------------------- >Lost Password: >http://www.tech-assist.org and select "Login Problems?". >Email Archives: >//www.freelists.org/archives/techassist/ > > > -- Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: tjanphyl@xxxxxxxxxxxxxxx ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/