MT-3070 This is the model number of this Emerson but tube is SANYO and the number on the tube it self 2M218 J OH24G anyways can you use aliminum foil as a jumper from the problem area and use conductive material for to connect the foil to the trace.. this is another idea .. I have used the foil for some repairs it worked very good. Ken Dinckan ALL Tv&Appliance Service 2747 Roosevelt Street # B Carlsbad CA, 92008 tel: (760)434-1131 fax: (760)434-8856 email to : kdinckan@xxxxxxx ----- Original Message ----- From: "Gary McCartney" <number63@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, February 06, 2002 4:05 PM Subject: [TechAssist] Re: GE microwave, GSU0421B- sliced keypad ribbon cable > > Thats one aweful price for a magnetron. Give me the number off the tube > and I'll look. I have some brand new ones that you can have for $25.00 > ea. They are Goldstar # 2M214 (19). I have subbed tubes many times and > as long as the mountings are the same, I've never had any problems. I > wouldn't sub a tube from a 1100W oven with one from a 750W oven though. > > > Thanks for the idea about the conductive material. The problem is that I > can't get down to the conductor in the flex cable because it is covered > with plastic, which I can't seem to peel or cut or scrape away. > > > Gary > > > Ken Dinckan wrote: > > > > Hi Gary > > you can probably try that conductive material they use for the worn remote > > control buttons.. I never tried but it might work just to give you idea.. > > See if it is helps > > I just had one Emerson Microwave and Tube is gone and called Fox > > they want $97.80 plus shipping. This Emerson has bad repitation for me. So > > do you have any used tubes laying around?? > > > > Ken Dinckan > > ALL Tv&Appliance Service > > 2747 Roosevelt Street # B > > Carlsbad CA, 92008 > > tel: (760)434-1131 > > fax: (760)434-8856 > > email to : kdinckan@xxxxxxx > > ----- Original Message ----- > > From: "Gary McCartney" <number63@xxxxxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Wednesday, February 06, 2002 3:33 PM > > Subject: [TechAssist] GE microwave, GSU0421B- sliced keypad ribbon cable > > > > > > > > I have this microwave oven which the customer attempted to repair > > > himself. He had duct tape wound around the primary interlock switch and > > > the switch was busted. After I replaced the switch and checked all the > > > interlock switches, I plugged the oven in and wasn't able to control the > > > keypad except for the defrost and clear buttons. Then I noticed that 3 > > > traces in the flexable ribbon cable from the keypad to the control panel > > > were sliced. Does anyone have a way of repairing this, other than > > > ordering a new keypad? The traces are sandwiched in plastic and they are > > > made of that nasty un-solderable conductive material. I tried to scrape > > > the plastic down to the traces but was not successful. Can the keypad be > > > removed from the plastic front panel which it seems to be permanently > > > part of? > > > > > > Thanks for any help. > > > -- > > > > > > > > > > > > Gary McCartney > > > > > > McCartney Electronics > > > 7134 Fife Rd, RR 7 > > > Guelph Ontario Canada N1H 6J4 > > > Fax: (519)821-1530 > > > email: number63@xxxxxxxxxxxxx > > > ------------------------------------------ > > > Make your TechAssist database better! > > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > > ------------------------------------------ > > > To UNSUBSCRIBE your email address, click here: > > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > > Or send a BLANK email with unsubscribe in the > > > SUBJECT field to the address above. > > > > > > > > > > ------------------------------------------ > > Make your TechAssist database better! > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > -- > > > > Gary McCartney > > McCartney Electronics > 7134 Fife Rd, RR 7 > Guelph Ontario Canada N1H 6J4 > Fax: (519)821-1530 > email: number63@xxxxxxxxxxxxx > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.