[TechAssist] Re: GE CTC187CN3 dead.
- From: "Larry E." <videotech@xxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Sat, 18 May 2002 18:14:53 -0400
Jorge, I had a 187BD2 doing that and it turned out to be U4101, CR4106
(shorted), and R4110 33K 1 watt. hope
this does it for you, be sure you have at least 4.8 volts to the eeprom.
Larry Eastman
American TV & Electronics
Sunny Florida
Home of www.tvjunkyard.com
Jorge Miret wrote:
>Hello guys:
>I have a GE CTC187CN3 that was dead,replaced the Eeprom and now it tries to
>start 3 times and
>nothing else.I have no schem.for it but hoping to solve the problem I
>replaced the regulator which is
>a STK730-150 and did not solve the problem.Any help will be welcome,please.
>TIA,
>Jorge.
>Jorge Miret-Puerto Rico
>J.C.Video & P.C.Repair
>Tel:787-761-0920.
>jmiret@xxxxxxxx
>
>
>------------------------------------------
>To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
>------------------------------------------
>***NEW*** Tips Added Instantly!!!***
>Submit Repair Tips here:
>http://www.tech-assist.org/secure/tip/
>
>
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
