Was dead,fuse open.Arc at AC input's spark gap indicating possible storm. Replaced the 5A fuse and the suspicious U4101 STK730-150. POwers up now with good picture/sound. Only problem is when I change channels I notice the picture comes in from sides a bit, like it is being loaded down. All seems to run cool. I powered on the TV and measured the source#1 (+140VDC source) At cathode of diode CR4106 and reads +135V.Low.Plugged in and in stand by it measures +141.5VDC.I've seen this source run +146V normally before. I changed the two caps at this source output, C4107 (100mf@250V) and C4105 (10mf@200V). No change. Changed PS capC4107 (10mf@63V) off pin 1 of U4101. No help. What am I missing? Phil Bader -- Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: philbad@xxxxxxxxxx ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/