[TechAssist] Re: Fw: [TechAssist]Mitsubishi CS35707-M1GA-All red screen-( No Blue and Green output on IC6f01)

  • From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Tue, 30 Nov 2004 08:14:09 -0500

John,
From Tech Repair CD:
Mitsubishi\CS35707\NO VIDEO\\\\1. CHECK IC6F01 PIN 8 (BLUE)* PIN 6 GREEN* AND 
PIN 5 (RED) FOR 3VPP SIGNAL
IF MISSING CONFIRM 3 VPP INPUTS AT PINS 1*2 AND 3\IF PRESENT. REPLACE IC6F01 
PART # 272P027010. AND ADD A
DIODE (1S2471M) PART # 264P045040.\INSTALLED WITH THE ANODE CONNECTED TO THE 
ANODE OF D6XA1 AND THE
CATHODE CONNECTED TO THE CATHODE OF D6F04\\\\\\

MITSUBISHI  \CS35607\No Green {Possible Other Two Primary Colors}\\\\Ic6f01or 
Ic6h01  Both An5862k\Then
add this mod to prevent recurring failures. Add A Diode (1N4148)  Installed 
With The Anode Connected To
The Anode Of D6xa1 And The\Cathode Connected To The Cathode Of D6f04. You may 
want to look closely for a
lifted trace or pad....the connections on these IC's are small\\\\\\
Jeff
--
Intrepid Video TV/VCR Repair
263 S Front St, Steelton PA 17113
717-939-7708; (F) 717-564-4952
www.intrepid-video.com  www.tech-repair.net
----- Original Message ----- 
From: "John H Smit" <jhsm@xxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, November 29, 2004 3:42 PM
Subject: [TechAssist] Fw: [TechAssist]Mitsubishi CS35707-M1GA-All red screen-( 
No Blue and Green output on
IC6f01)


Oops sorry,I forgot to mention that it is a Mitsubishi,CS-35707
Thank you
John
----- Original Message ----- 
From: "John H Smit" <jhsm@xxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, November 29, 2004 11:07 AM
Subject: [TechAssist] CS35707-M1GA-All red screen-( No Blue and Green output
on IC6f01)


> Hello to all
> No sams listed for this chassis.
> I have a red screen,and the CRT checks good full output at the cathodes.
> No green or Blue at the screen.
> I get a good color signal at pin 5 of IC6F01,no out put at pin 6 or 8. of
> the same IC
>
> I tried to find the input to the ICF601,but I am working without a S/M it
> is
> hard to circuit trace without knowing what to check.
> I am wondering if someone could give me a hint on this one,
> Could it be the IC or something else.
> If someone has any info on this chassis where to check for the color input
> to IC6F01.
> And on which pin the voltage is applied,I really would appreciate.
> Thank you in advance
> John H Smit
> Smit's TV Service
> Box10
> Gunnison Utah 84634
> 800-355-4948 Fax&Phone
> 435-528-7955 Fax&Phone
> jhsm@xxxxxxxxxx
>
>
>
>
> -----------------------------------------------------------------------------
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
>



-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/




-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/

Other related posts: