[TechAssist] Re: Fw: Re: Bose Wave Radio/CD model # AWRC-1P
- From: "Mitchs Electronics" <Mitchstv@xxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 12 Dec 2002 15:53:59 -0600
I've been trying to call BOSE for 3 weeks 10/15 times a day line is always
busy.
Parts # is 1-800-367-4008 ? Can any one confirm this? Thanks
Rick Mitchell
Mitch's Electronics Ser.Co.
Mitchstv@xxxxxxxxxx
3935 south 20th
Lincoln, Nebraska 68502
----- Original Message -----
From: "al m" <ampm@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, December 12, 2002 3:45 PM
Subject: [TechAssist] Fw: Re: Bose Wave Radio/CD model # AWRC-1P
>
>
>
>
> > Jim the only paper label on the assembly is the 0050186 # . Do you sell
> the
> > parts or what's the deal.I have to get an ok from customer.
> > al marquardt
> > ampm@xxxxxxx
> >
> >
> > ----- Original Message -----
> > From: "Jim Myers" <jr.myers@xxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Wednesday, December 11, 2002 12:51 PM
> > Subject: [TechAssist] Re: Bose Wave Radio/CD model # AWRC-1P
> >
> >
> > >
> > > Good bet you need to replace the optics, Bose p/n is 193373 for the
> > assembly
> > > with motors and gears, don't have the cost but I think we sell them
for
> > > about 80.00 customer price. If you can see a paper label on the actual
> > laser
> > > assy and there is a KSS-XXX number you may be able to get it from some
> of
> > > the common parts suppliers.
> > > Jim Myers
> > > Since 1972
> > > Telrad Electronic Services Co.
> > > Fort Wayne, IN 46815
> > > jr.myers@xxxxxxxxxxx
> > > 260-432-4486 Fax and Voice
> > > Fax is always on
> > > ----- Original Message -----
> > > From: "al m" <ampm@xxxxxxx>
> > > To: <techassist@xxxxxxxxxxxxx>
> > > Sent: Wednesday, December 11, 2002 11:32 AM
> > > Subject: [TechAssist] Bose Wave Radio/CD model # AWRC-1P
> > >
> > >
> > > I just started working on these for extra money on slow weeks. I know
a
> > > little about them but expect to read up on them. The problem is the
disc
> > > when inserted tries to spin 3 times then stops. The laser is trying to
> > > focus, I can see it moving up and down. My question is does the laser
> have
> > > to detect a disc for the disc to spin. If so am I right to ASSUME it
is
> > the
> > > laser assembly and where can I get one. # on 0058106 is on assembly.
> > thanks.
> > > al marquardt
> > > ampm@xxxxxxx
> > >
> > >
> > > ------------------------------------------
> > > Submit A Repair Tip For Everyone Here:
> > > http://www.tech-assist.org/secure/tip/main.html
> > > ------------------------------------------
> > > To REMOVE your email address, click here:
> > > http://www.tech-assist.org/unsubb.html
> > > To CHANGE your email address, click here:
> > > http://www.techassist.net/forms/change.html
> > >
> > > ------------------------------------------
> > > Submit A Repair Tip For Everyone Here:
> > > http://www.tech-assist.org/secure/tip/main.html
> > > ------------------------------------------
> > > To REMOVE your email address, click here:
> > > http://www.tech-assist.org/unsubb.html
> > > To CHANGE your email address, click here:
> > > http://www.techassist.net/forms/change.html
> > >
> > >
> >
>
>
> ------------------------------------------
> Submit A Repair Tip For Everyone Here:
> http://www.tech-assist.org/secure/tip/main.html
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
>
>
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
Other related posts:
