[TechAssist] Re: Fw: PanasonicPT40LC12-PT-45LC12 dead no lamp or temp LED's

  • From: Al L <alleathe@xxxxxxxxxxxxx>
  • To: techassist@xxxxxxxxxxxxx
  • Date: Thu, 07 Jul 2005 13:51:08 -0400

Thanks Robert!

Al Leatherman
224 RT. 46
Mine Hill, NJ 07803
973-361-5796
WWW.ALS-TV.NET

----- Original Message ----- 
From: "tvservice" <tvservice@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, July 07, 2005 1:44 PM
Subject: [TechAssist] Re: Fw: PanasonicPT40LC12-PT-45LC12 dead no lamp or 
temp LED's


> Al,
> remove the back cover and measure for continuity across the thermal fuse
> above the lamp housing.
> if open jump it wth a 5 amp fuse, be sure to close the safety switch with
> the small blue lever then try to power on.
> If comes on ok you will need to replace the entire ballast assembly to get
> that fuse.
> Panasonic does not have a part number for just the fuse on the PT40LC
> series.
> It is possible to cut off the fuse and replace with another but dont 
> solder
> must be crimped.
> ballast # LSEB3062A1  COST @ $200.00
>
> Robert
> tvservice@xxxxxxxxxxxxx
> H & H Electronics Inc
>
>
> ----- Original Message ----- 
> From: "Al L" <alleathe@xxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Thursday, July 07, 2005 10:06 AM
> Subject: [TechAssist] Fw: PanasonicPT40LC12-PT-45LC12 dead no lamp or temp
> LED's
>
>
>>
>> 05 AM
>> Subject: Fw: PanasonicPT40LC12-PT-45LC12 dead no lamp or temp LED's
>>
>>
>> >
>> > Subject: PanasonicPT40LC12-PT-45LC12 dead no lamp or temp LED's
>> >
>> >
>> >> Green blinks steady,red on steady on power button,when toggled.
>> >>      I suspect power supply or lamp ballast.Customer changed
> lamp,claims
>> >> same condition,said old lamp was cracked, but no "pop"!
>> >>    Problem:I see many references to changing very expensive parts,in
> the
>> >> manual.
>> >>    First one for me,still in customers home,have not charged even a
> call
>> >> until I get some advice.
>> >>   Game plan:Pull set,fix set,play set,get paid well. My concern is the
>> >> likelihood of having to change the projection unit,or an expensive 
>> >> CBA.
>> >>   Any ideas? TIA.
>> >>
>> >> Al Leatherman
>> >> 224 RT. 46
>> >> Mine Hill, NJ 07803
>> >> 973-361-5796
>> >> WWW.ALS-TV.NET
>> >>
>>
>>
>> --------------------------------------------------------------------------
> ---
>> This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
>> Set Vacation
> mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
>> Lost Password: http://www.tech-assist.org  and select "Login Problems?".
>> Email Archives: //www.freelists.org/archives/techassist/
>
> -----------------------------------------------------------------------------
> This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
> Set Vacation 
> mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
> Lost Password: http://www.tech-assist.org  and select "Login Problems?".
> Email Archives: //www.freelists.org/archives/techassist/
> 


-----------------------------------------------------------------------------
This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org  and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/

Other related posts: