[TechAssist] Re: Fw: Emerson Microwave MW8985W Need info
- From: "Hoyt's TV" <hoytstv@xxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 5 Oct 2005 11:35:53 -0400
Does it work?
I saw many MWs a few years ago that had bad fuse holders causing the fuse to
blow.
Years ago when Magnavox used high amp. fuses in filament circuits in tube
TVs the blown fuse was usually caused by a bad fuse holder.
Russ Hoyt
Hoyt's TV
Exeter, NH
----- Original Message -----
From: "al m" <ampm@xxxxxxx>
To: "tech assist" <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, October 05, 2005 11:13 AM
Subject: [TechAssist] Fw: Emerson Microwave MW8985W Need info
>
>
>> This microwave had a blown 15A fuse. Checked all the switches and nothing
>> wrong. Is there a bulletin out about changing the fuse to a higher value?
>> This is a 1997 unit. I figure maybe the fuse is just kaput. Thanks.
>> Al Marquardt
>> ampm@xxxxxxx
>> Al Marquardt Electronic Repair
>> 206 W Main
>> Girardville Pa. 17935
>
>
> -----------------------------------------------------------------------------
> This Email List is accessible to the general public through search
> engines. Remove: http://www.tech-assist.org/remove.htm
> Set Vacation
> mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
> Lost Password: http://www.tech-assist.org and select "Login Problems?".
> Email Archives: //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
This Email List is accessible to the general public through search engines.
Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/
Other related posts:
