Anyone have any tips or notes on this chassis, working with out a schematic? These voltage test points G board check good: TP 19v. (ok) TP +15v. (ok) TP -15v. (ok) TP 11v. (ok) TP -12v. (ok) TP stby 5v. (ok) TP 200v. (ok) TP 135v. (ok) On G board connector CN202 to A board CN501 the -5v. (ok) but the +5v. measures only 3.6v! With clip CN202 lifted +5v. measures 4.3 Going to check the 9v. supplies on the A board tomorrow. Maybe someone has ran into this before, or can help? Robinson Electronics 1075 Sweeten Creek Road #51 Asheville, NC 28803-1757 Ph./Fax. 828 274-3787 Toll Free. 1-888 ROBELECT www.robinsonelectronics.com www.robelect.com Mailto: RobinsonElectronics@xxxxxxxxxxx ----- Original Message ----- From: "Robinson Electronics" <RobinsonElectronics@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, November 21, 2005 7:32 PM Subject: Sony Proj. KP-43T90 Chassis RA-3B. No video, sound ok, OSD is bowed, mis-converged. > Can one of you Sony Techs help us out with this set? > Set powers on with a blink code of 6 blinks, then led stays on but no video > at all, sound is ok though., and the OSD comes on but is bowed and not > converged. I changed both of the convergece ic's anyway (not the problem > though). > Has anyone encountered this, that can help us, or offer some possible > problem areas? > Thanks. David. > > Robinson Electronics > 1075 Sweeten Creek Road #51 > Asheville, NC 28803-1757 > Ph./Fax. 828 274-3787 > Toll Free. 1-888 ROBELECT > www.robinsonelectronics.com > www.robelect.com > Mailto: RobinsonElectronics@xxxxxxxxxxx > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/