I agree Jeff. I checked all related components. They seemed to be OK. I let run all night. Been checking temp. with my Minolta/Land Mini Laser. Seem to be running at 133 degrees constant with the back off. Think I will put the back on and let run. I have seen a lot HOT run hotter and not fail. Jerry Alpha 21 Electronics Granite City, IL 62040 Ph. 618-452-8620 Fax 618-876-5157 www.alpha21century@xxxxxxxxxxxxx Shoreline Electronics <jstielau@xxxxxxxx> wrote: Outputs usually blow for a reason! Let it run overnight! ========================== Jeff Stielau Shoreline Electronics Repair 344 East Main Street Clinton,CT 06413 860-399-1861 860-664-3535 (fax) jstielau@xxxxxxxx ======================== "If you push something hard enough it will fall over." Fudd's First Law of Opposition - Sir Sidney Fudd ----- Original Message ----- From: "Gerald Gann" To: Sent: Wednesday, March 10, 2004 7:25 PM Subject: [TechAssist] FIXED Sanyo DS35590 chassis 35590-00 Dead > Sanyo DS35590 chassis 35590-00 Dead. HV would come up and shutdown. > HOT shorted. Replacing HOT Q402 2SD1880 Fixed the set. Nice to have a easy one now and then. > Jerry > > Alpha 21 Electronics > > Granite City, IL 62040 > > Ph. 618-452-8620 > > Fax 618-876-5157 > www.alpha21century@xxxxxxxxxxxxx > > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/