Winstips has a tip to check 12-V zener D124 and R442 (4.7 ohm, 2 wt). Another tip says found glue under small ceramic disk near IC101 corroded trace going to relay. HTH, Ken Smith Gulf Technical Services 3034 Gulf Breeze Parkway Gulf Breeze, FL 32563 850-934-8324 (Voice) 850-932-0819 (Fax) On Sat, 6 Mar 2004 11:25:14 -0500 "Ed Gaidies" <teltek3@xxxxxxxxxxxx> writes: > Relay contact was burned away on this. Repaired it. Also resoldered > bad > connection at R521 and R523. Still no Relay click. Shorting the Relay > will bring set on. > Ring a Bell for anyone? > > -Ed- > > Ed Gaidies > Tel-Tek Electronics. > Ontario-Canada > > teltek3@xxxxxxxxxxxx > > > > ------------------------------------------------------------------------- ---- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ________________________________________________________________ The best thing to hit the Internet in years - Juno SpeedBand! Surf the Web up to FIVE TIMES FASTER! Only $14.95/ month - visit www.juno.com to sign up today! ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/