There is a dead short from the collector to one of the pins on both of the transistors. The customer is going to go back to the high school where he got it to try to find more info. The scope is made by Peerless Industries. Kevin Wilks Kevin's TV & Video Repair Penticton BC Canada kevintv@xxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Al Gutz Sent: Wednesday, June 02, 2004 7:32 PM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: Diagnostic Pulsar Scope for analyzing car engines, model 500, need transistor replacement Kevin Don't forget that is a germanium transistor. Reads in both directions on a meter, if I recall it should be about a 10:1 ratio. Don't know if you can read them on a DMM. You may have to figure out the circuit and take a guess what the other one is. Its likely a Ge type as well. Al G Al's TV-Electronics Pembroke Ont. Canada Kevin wrote: > This Pulsar Diagnostic Scope has 3 tubes (yes tubes) that test "good" on > my Sencore tube tester and 2 shorted transistors. The first transistor > is a 2SB337, which crosses to an NTE 121 top hat, and the second one is > a TL-2005 which I can find no cross for (also a top hat design). > Anybody have any information on this old timer? Customer wants it > fixed. Thanks. > > Kevin Wilks > Kevin's TV & Video Repair > Penticton BC Canada > kevintv@xxxxxxx > > > > > ------------------------------------------------------------------------ ----- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ------------------------------------------------------------------------ ----- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/