[TechAssist] Re: CTC203AA13 Low B+ in Stndby
- From: "al m" <ampm@xxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 12 Aug 2004 15:24:51 -0400
Are we talking secondary B+ or primary B+? I have 138V on the secondary B+
in standby.
Al Marquardt
ampm@xxxxxxx
Al Marquardt Electronic Repair
206 W Main
Girardville Pa. 17935
----- Original Message -----
From: "tvservice" <tvservice@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, August 12, 2004 3:10 PM
Subject: [TechAssist] Re: CTC203AA13 Low B+ in Stndby
> You should have @ +160 volts as main B+ in standby when on will drop to @
> +141 volts
> Unsolder the collector of HOT Q14401 see if B+ comes up if not
troubleshoot
> for power supply problem.
>
> Robert
> tvservice@xxxxxxxxxxxxx
> H & H Electronics Inc
>
> ----- Original Message -----
> From: "Keith Trumbla" <keith@xxxxxxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Thursday, August 12, 2004 10:24 AM
> Subject: [TechAssist] CTC203AA13 Low B+ in Stndby
>
>
> > Do these sets idle at a lower B+ when off ? Our set is dead, but we have
> 87 V as our main B+
> > Keith Trumbla
> > www.bemelectronics.com
> > Suite 212-530 Century St
> > Winnipeg, Manitoba
> > Canada R3H 0Y4
> > Ph.204.775.2875
> >
>
> --------------------------------------------------------------------------
> ---
> > Lost Password:
> > http://www.tech-assist.org and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
>
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
