La7610 bad ? not much information to go on hear, this is like those calls my set went out how much is it going to cost?. Brightness turned down?. B+ ok? E-prom ok? CRT voltages ok has Video information? AGC ok? Mr. R. L. Mitchell Mitch's Electronics Lincoln, NE 68502 Mitchstv@xxxxxxxxxx ----- Original Message ----- From: "Doug Keller" <dek@xxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, December 09, 2003 12:54 PM Subject: [TechAssist] CTC186A This originally came in with the infamous "f-connector ripped out of the tuner" problem. I fixed that, checked it for a day, gave it the shake, bump, slap, and jar test. It worked perfectly. Delivered it and 7 days later I get a call that the picture is black. If screen is turned all the way up, it has dim pic w/retrace lines.This one has me stumped. I have resoldered the tuner grounds. Twice. Looked for solder splashes, anything that would explain this. I've checked cr4704, r4702, and r4715 that were in the tips pages to no avail. At this point any suggestions would be appreciated. Doug -- Doug Keller Wis-Kel Electronics 101 Freeland Ave. Terra Alta, WV USA 26764 dek@xxxxxxxxxxxxxx http://www.tech-assist.org "Learn from the mistakes of others, because you won't live long enough to make them all yourself" **************************************************************************** * Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/