[TechAssist] CTC185 Temp!
- From: Hermantvr@xxxxxxxxxxxxx
- To: techassist@xxxxxxxxxxxxx
- Date: Sun, 3 Nov 2002 21:13:49 EST
Just finished a CTC 185. Rebuilt the Power Supply with suggested kit. Heat
shields seem too hot. Replaced multiple components which helped but still
seems a little warm. Would some of you guys that have temperature test
equipment check the temperature of the heat sinks on the CTC185 and send
either me personally or the group your results. Just purchased temperature
test equipment and want to start a data base for some of these chassis. The
reason for the CTC185 is because of the way they use a winding in the FBT to
feed the regulator. Thanks!
Tommy R Herman
250 School Ave SW
Taylorsville, NC 28681
828-632-5322 voice
828-632-3880 fax
hermantvr@xxxxxxxxxxxxx
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
