Your 15 volts must be above 12 volts minimum--replace cr4118 Damon Brunger damon101@xxxxxxxxxxxxxx Telrad Electronic Services Ft Wayne, IN 46815 ----- Original Message ----- From: "Barry MacInnes" <foxhole@xxxxxxxxx> To: "Tech Assist" <techassist@xxxxxxxxxxxxx> Sent: Wednesday, May 01, 2002 8:16 AM Subject: [TechAssist] CTC169EJ5 shutdown > > Hello Gang, > This unit builds high voltage then shuts down. Stanby voltages seem OK, > except the 15v is low about 11volts. I have replacedC4401 andC4403 and > checked CR4401 and Q4401. Has anyone had this problem? What is the most > common cause? > Thanks, > Barry > TV Service Clinic > W. Lebanon, NH > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/