Bruce; Closest I have is CTC302AY1 and AX1. What's the RCA Part#...I may have it listed under that. -Ed- Tel-Tek Electronics Ontario-Canada teltek3@xxxxxxxxxxxx teltek@xxxxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Bruce Tiedeman Sent: Friday, October 22, 2004 11:38 AM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] CTC 203 CA10 eprom file... Can some one on the list share this file in CC or Pony format. This is Model #F32649 . This unit has the guide and a Gemstar module. I am having trouble initializing this EPROM. If I get a new file might be able to write it to the EPROM. I have a CTC203 that came in HOT blown and power supply blown. I fixed the supply and have a good regulated voltage of 139 volts. The set will not start up and I see no data activity on EPROM . the 5 volt supply is OK and reset pulse is there. I am stuck. I unplugged the Gemstar module also , still no luck. No relay click. thanks, Bruce. B&T Electronics 139 Margaret St Sarnia Ontario Canada N7T 2Y3 519 344 1850 ------------------------------------------------------------------------ ----- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/