Go to this link http://www.paradigmstore.com/185PS.pdf Dang www.tvcrcomputers.com ----- Original Message ----- From: "Barry Thompson" <barrystv@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, July 23, 2002 7:29 AM Subject: [TechAssist] CTC 185 ab Shuts Down > > Hi All: This set came in dead,changed cr4110 and the12 volt reg. IC. The set > now powered up but keeps shutting down. Change cr4104 and c126 in the reset > circuit,also change the 12 volt run diode and opened the on off switch.The > B+ is at 132 ,my hv probe is broken but I sense that the HV is to high.It > will run for a few mins.but when you change channels It shuts down.I checked > the eprom with the C.Checker.Could someone send me the training manual on > this set because I don't know which way to go on this set. Thanks Barry. > Barrys TV > barrystv@xxxxxxx > 613 224 3406 > fax 613 723 9670 > 0ttawa,Canada > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.tech-assist.org/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/