John , If you call me I can explain how to do these........don't feel like typing a novel right now! ================================= Jeff Stielau Shoreline Electronics Repair 344 East Main Street Clinton,CT 06413 (860)399-1861 (860)664-3535 FAX jstielau@xxxxxxxx ================================= ----- Original Message ----- From: "John & Sharon Mikowich" <spacenut@xxxxxxxxxxxx> To: "Tech Assist" <techassist@xxxxxxxxxxxxx> Sent: Friday, September 17, 2004 2:59 PM Subject: [TechAssist] CTC 169 PTV *** Green Anode Button Arching ! *** > Hi Everyone; > > This ctc169 ptv came in dead. found horz. out shorted. replace > horz. out & splitter. Fired up the set, started hearing this arching, > set shut down. Found hv anode button on green crt had burnt through & is > arching to gnd. Since I have never had to change one of these before on > a ptv I really am not sure how to. What I would like to know is how do I > change this or do I have to replace the complete tube ? Do I have to > separate the tube from the housing & how. then when I put back together, > what type of alignment do I have to do? also is there a part number for > the buttons. Have no manual so on my own. Any help would be appreciated > !!! > > Thank You In Advance; > > John Mikowich > East Side Tv. > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/