This is my third time I have seen this now. I install a 95-4134-15 flyback and then I see the set about a year later (not a redo) with a convergence problem, Pix will bow all sides and pulsate resembling bad convergence ICs, even two of the 1 ohm resistors will be burned. Before you change the ICs check the -5v reg on the convergence board for input and output, if there is no -9v feeding the reg IC you have an open flyback winding on pin 2 Tony Saracco TCS ELECTRONICS 406 Andra Ct. Gilberts, IL 60136 tcselectronics@xxxxxxxxx ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/