[TechAssist] Re: Beware of Chipper Check V1.85
- From: "Joel Jacobs" <samurai@xxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 26 Apr 2005 11:55:11 -0400
I'm not ASC for Thompson. I'd have to call their tech line and PAY THEM to
tell someone who probably could care less that their software don't work. I
can here it now, "You must be doing something wrong" - "Our techs use that
software every day" etc... That'll be 20 bucks for the phone call...
Joel Jacobs
Ohio Consumer Electronics
Pickerington, Ohio
----- Original Message -----
From: "Phil Bader" <tjanphyl@xxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, April 25, 2005 5:47 PM
Subject: [TechAssist] Re: Beware of Chipper Check V1.85
> Why don't you guys yell! It's good you are smart enough to find a fix,
> but Thats just sloppy for Tompson. Those engineers get a heck of a lot
> more money that we do,so call! Maybe the poor sots don't even know about
> it yet. Mak'm pay!
> Phil Bader
>
> Philip Bader
> Jan Phyl TV Inc. (estab. 1976)
> 3420 Recker Hwy. Winter Haven, Fl. 33880
> Fax (863) 299-8821
> email: tjanphyl@xxxxxxxxxxxxxxx
>
>
>
> Joel Jacobs wrote:
>
> >I don't know what's up with Thompson leaving broken software on their
> >website but I ran into the same problem. To get it working copy the file
> >named CHIPCOM.DLL out of the install directory of working software to a
safe
> >place. Then upgrade to the new version and copy that file back into the
> >install directory. That's what worked for me anyway...
> >
> >Joel Jacobs
> >Ohio Consumer Electronics
> >Pickerington, Ohio
> >
> >----- Original Message -----
> >From: "Jim Myers" <jr.myers@xxxxxxxxxxx>
> >To: "Techassist" <techassist@xxxxxxxxxxxxx>
> >Sent: Monday, April 25, 2005 5:14 PM
> >Subject: [TechAssist] Beware of Chipper Check V1.85
> >
> >
> >
> >
> >>May be just a corrupt download or my old Laptop but V1.85 does not work.
> >>The Detect EEProm test under the diagnostic pull down where it test the
> >>EEprom in the Chipper Checker failed and it would not detect the ATC221
> >>chassis. I downloaded and installed version 1.84a and it works just
> >>fine. The non working Version 1.85 had me troubleshooting my Chipper
> >>Check hardware, lo and behold the 5.0 volt VCC in Chipper Check is and
> >>probably should be only about 3.3 volts.
> >>--
> >>
> >>
> >>********************************
> >>Since 1972 *
> >>Jim Myers *
> >>Telrad Electronics *
> >>Fort Wayne Indiana *
> >>********************************
>
>>--------------------------------------------------------------------------
> >>
> >>
> >---
> >
> >
> >>This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
> >>Lost Password: http://www.tech-assist.org and select "Login Problems?".
> >>Appliance Repair List:
> >>
> >>
> >http://www.tech-assist.org/secure/tip/chatjoin.htm#app
> >
> >
> >>Email Archives: //www.freelists.org/archives/techassist/
> >>
> >>
> >>
> >
>
>---------------------------------------------------------------------------
--
> >This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
> >Lost Password: http://www.tech-assist.org and select "Login Problems?".
> >Appliance Repair List:
http://www.tech-assist.org/secure/tip/chatjoin.htm#app
> >Email Archives: //www.freelists.org/archives/techassist/
> >
> >
> >
> >
> --------------------------------------------------------------------------
---
> This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
> Lost Password: http://www.tech-assist.org and select "Login Problems?".
> Appliance Repair List:
http://www.tech-assist.org/secure/tip/chatjoin.htm#app
> Email Archives: //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app
Email Archives: //www.freelists.org/archives/techassist/
Other related posts:
