Certainly not. Already done everything that is suggested here. This is how I knew what pins were the input!! Really need a schematic if you cannot help Regards ----- Original Message ----- From: "al" <alleathe@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, January 05, 2002 2:52 PM Subject: [TechAssist] Re: BUSH 2568NTX - no vertical sweep > > Check source voltage, look up vertical ic in NTE crossover, go on web and > get pinout.NOW: Are you pulling our legs?? BUSH?> al > > > ----- Original Message ----- > From: "babalino" <babalino@xxxxxxxxxxxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Saturday, January 05, 2002 8:53 AM > Subject: [TechAssist] BUSH 2568NTX - no vertical sweep > > > > > > Hi, I have a BUSH 2568NTX that has a horizontal line across the centre of > > the screen. The sound is OK. > > I have not got a schematic and am appealing to anybody - could you email > me > > this schematic please? > > I have checked the vert deflection IC at pins 1 and 2 and the input is not > a > > triangular waveform (very distorted). > > If anybody has had this fault or has a copy of the schematic I would be > very > > grateful. I have repaired these types of faults previously - for some > > reason my head has gone blank on this one. > > Thanks in advance > > > > ------------------------------------------ > > Help make your TechAssist database better! > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > > > ------------------------------------------ > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.