This unit had a few problems with dust on lens and sensors. When I press STOP, CD will pull from the lens, hesitate(I hear motor running) then be pulled back to the CD Lens and pulled out again, sort of like VCR carriage LED problem. When I use the duster, it worked fine a few times. I also had a problem with intermittent power to CD unit when I flexed the board with the big transformer. Resoldered the board took care of that problem. Main problem now is no audio from the CD player. After the solder job, the audio came back for a few seconds, then went out. This was the only time I had audio from the CD player. If I press tuner or cassette, I get audio just fine. Whoa! I hope someone can help with this complex problem, as I do not do much audio, but this is for a regular customer. Why did the audio work, right after I did the solder job on the main transformer? I would appreciate any comments. Thank you. Jeff FAX 1-413-280-0677 Jeff Dougherty Intrepid Video & Electronics 501 Luther Rd Harrisburg, PA 17111 717-909-8844 VCR tips, electronics info & general interest. www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.