Customer complaint is "loads disc,says no disc" and "when it DOES play,it won't play past Track 13 or 14". Sometimes it DOES load and say no Disc,but when it DOES play,it seems to play all the way thru. Anyway, in WinStips I'm finding a couple of tips that make me think there may be Bulletins on these units. One says to change the value of R416 and R418 from 150K to 82K(Symptom was 'says no disc') I can't find these resistors BTW.Also to change F402 with a 0 ohm resistor. I see the board marked with F401 and F402,but I can't tell which SM device are the Fuses. Another says to Cut part of Optical Block Flatwire reinforcement Board.............................WHAT ??? Peggs Peggs' Electronics 1519 West 2nd Street Owensboro,KY 42301 270-926-4968 fax 270-686-7399 ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/