Hi again, I'm about ready to take a 3rd look at this TV. I need to know what the "exact" B+ voltage is supposed to be. I am thinking that 136 volts is about 6 volts too high. Tried everything I can think of to get it lowered. Patience and time, will win ! LLW *************** Hi Members, This Panasonic TV shuts down after 5-10 minutes. Has a good picture. H.O.T runs cool, Vertical runs hot, but holds up OK. The B+ measures 136 volts. It seems too high. The voltages on the Reg. IC (STR58041) reads from hot ground: Pin # 1 = 97.2 2 =136.6 3 =? (can't read) 4 =138 5 =142 Working without a manual (As usual). Uses Sams # 3891 (which I don't have). I have checked Q801, D825, D823, R829, and replaced C820 (10 @ 100). Soldered the hell out of everything in the Reg. ckts. Replaced the Relay. No help ! Any help appreciated, LLW LeRoy Westlund Westlund TV & Electronics " It's such a pretty world 93 North Main today !.... Centerfield, UT 84622-0087 Look at the Sunshine. " Ph./Fax 435-528-3822 :-) mailto:LLW@xxxxxxxxxx ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/