[tccrockets] Re: For sale

  • From: Tom Rouse <rousetechtom@xxxxxxxxx>
  • To: tccrockets@xxxxxxxxxxxxx
  • Date: Tue, 19 Mar 2024 23:46:32 -0700

A Bernard Special?Hope not!I went to their lab and helped them clean out the room.There was a rocket we found  that had augered into the ground. Looked like playa dirt. It was dirty and torn to heck with a mangled nose.  And, the motor case was in it untouched.It took ten minutes to peel off the rocket off the case.Obviously an upper stage of a rocket.Pretty damn agressive for college kids!Well it didn’t work. (Go figure)
So Larry gets the prize!
I can take it apart and look at the color and give it a sniff test, but that would take all the fun away!!   
TSent from my iPhone, so expect typos!

On Mar 19, 2024, at 11:36 PM, Neil Balch <neilbalch@xxxxxxxxx> wrote:

It's one of the "Risky Batman" APCP pours Joe Barnard did that ended up with surface bubbles on the inside faces 😉 Would mean an extra spicy burn, ha

Neil Balch


On Tue, Mar 19, 2024 at 10:19 PM James Dougherty <jafrado@xxxxxxxxx> wrote:
hehe this is truebut how fun “guess the grains” game 😀
pretty soon we’re gonna have to start placing bets!!!
On Tue, Mar 19, 2024 at 9:12 PM Richard King <drrbk@xxxxxxxxxxx> wrote:
If the price was right, I wouldn’t care what it was..... I’d just fly it!   RK   From: JAMES FRANCO Sent: Tuesday, March 19, 2024 8:24 PM To: tccrockets@xxxxxxxxxxxxx Subject: [tccrockets] Re: For sale   My guess it's a M1540 Imax.  They would have chosen it for good burn time plus a good thrust curve for that case.   Gotta do the sniff test....        Jimmy F. TRA 12524 L3       -------- Original message -------- From: srkendal <srkendal@xxxxxxxxxxx> Date: 3/19/24 20:18 (GMT-08:00) To: tccrockets <tccrockets@xxxxxxxxxxxxx> Subject: [tccrockets] Re: For sale   I would hope that, at the very least, they'd know who sold it to them. There must be a record. Who was their advisor?   Eh, never mind. Just water that long ago past under the bridge...   Steve  
On Mar 19, 2024 at 8:12 PM, James Dougherty <jafrado@xxxxxxxxx> wrote:

yeah I know but it’s from a student team and my god if they dont even know what motor it is, I seriously doubt they would know that 75/98 AT loads are interchangeable with CTI cases (and the opposite is not always true)   but yeah, I think Larry is going to have a good time with this.   an M something       On Tue, Mar 19, 2024 at 7:04 PM JAMES FRANCO <aldocyber3@xxxxxxx> wrote:
Could be AT, but doubt it. This is from a while back.   AeroTech Consumer Aerospace is pleased to announce the certification of all AeroTech 75mm reloads with the use of Cesaroni Technology Incorporated 75mm hardware. Using AeroTech 75mm reloads with CTI 75mm hardware will not require any additional parts or modifications. Single-throat 75mm AeroTech reloads may be used immediately with CTI hardware.     Yes Vmax propellant has a distinct smell before and while burning.   If I remember the skids have unique scent too.   LOL, now I'm going to go do some grain snifs from my stockpile.     Jimmy F. TRA 12524 L3       -------- Original message -------- From: James Dougherty <jafrado@xxxxxxxxx> Date: 3/19/24 17:56 (GMT-08:00) To: tccrockets@xxxxxxxxxxxxx Subject: [tccrockets] Re: For sale   haha, its CTI   Jimmy and I have a nose for VMax and Skidmark …. actually, just cut a little bit of the grain and burn it   But I bet Robert would know …   On Tue, Mar 19, 2024 at 3:19 PM Neil Balch <neilbalch@xxxxxxxxx> wrote:
"Oh really? Do you, in fact, have an associate's degree from AeroTech? I think it wants you to think it's a sparky!"   https://youtu.be/JGRdZC3qhM4?si=iSAJXfyyKa5T9YHX   Neil Balch
    On Tue, Mar 19, 2024 at 3:15 PM JAMES FRANCO <aldocyber3@xxxxxxx> wrote:
Can I sniff the nozzle end before I make my guess on propellant type.   LOL       Jimmy F. TRA 12524 L3       -------- Original message -------- From: James Dougherty <jafrado@xxxxxxxxx> Date: 3/19/24 14:45 (GMT-08:00) To: tccrockets@xxxxxxxxxxxxx Subject: [tccrockets] Re: For sale   29.79 - 5G case   M1400,M1540,M1300,M1675,M1670,M1810, M3100,M1401,M1160   or   L1685,L395 (12.5s burn)     On Tue, Mar 19, 2024 at 12:29 PM Tom Rouse <rousetechtom@xxxxxxxxx> wrote:
Sold to Larry Taylor.
Thank you all for the help.

The label was missing and the case was 30” +- from what I remember.
Larry will have fun worth this!

Let's wait to see what motor it is when he launches it at the TCC launch.
Any wagers?

Sparky, White, blue, fast, slow?

Like Forest Gump  says-
“Life is like a box of chocolates. You never know whats inside”!



T


> On Mar 19, 2024, at 10:53 AM, James Dougherty <jafrado@xxxxxxxxx> wrote:
>
> just measure the case length
> motor dims online
>
>
> On Tue, Mar 19, 2024 at 10:34 AM Ethan Jarocki <ejarocki72@xxxxxxxxx> wrote:
> Could they pop open a closure and look at the grains' color? That may help ID the motor.
>
> On Mon, Mar 18, 2024 at 10:33 PM Cris Erving <cris.erving@xxxxxxxxxxx> wrote:
> Looks like a 5G... maybe 6G.
>
> Eggtimer Cris
>
> From: tccrockets-bounce@xxxxxxxxxxxxx <tccrockets-bounce@xxxxxxxxxxxxx> on behalf of Tom Rouse <rousetechtom@xxxxxxxxx>
> Sent: Monday, March 18, 2024 3:08 PM
> To: tccrockets@xxxxxxxxxxxxx <tccrockets@xxxxxxxxxxxxx>
> Subject: [tccrockets] Re: For sale   Hi Steve- 
> Not sure.
>
> Sent from my iPhone, so expect typos!
>
>> On Mar 17, 2024, at 9:28 PM, srkendal <srkendal@xxxxxxxxxxx> wrote:
>>
>>  Just curious, how many grains is that?
>>
>> Steve Kendall
>>
>>
>>> On Mar 17, 2024 at 9:25 PM, Tom Rouse <rousetechtom@xxxxxxxxx> wrote:
>>>
>>> Any one interested in a CTI 75mm case and motor already to go?
>>> SJSU rocket club had it from a year ago and don’t remember what reload it is.
>>> Make offer.
>>> T
>>> Note the Anti static bag on nozzle end for safety)
>>>
>>>
>>>
>>> <image0.jpeg>
>>>
>>>
>>>
>>> Sent from my iPhone, so expect typos!
>>>



Other related posts: