I thought ducks were water tight? On Nov 22, 2011 1:36 PM, "Denis Dodson" <coocoo@xxxxxxx> wrote: > Mine leaks and I have been told they all do. Mine seeps, actually.**** > > ** ** > > *From:* tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] *On > Behalf Of *James Dwan > *Sent:* Tuesday, November 22, 2011 12:35 PM > *To:* tcb@xxxxxxxxxxxxx > *Subject:* [tcb] Re: Steering Box Rebuild**** > > ** ** > > Yeah as far as I know this is how splitties are supposed to steer, I only > have experience with Bays. We've replaced the center link pin and improved > the steering quite a bit.**** > > ** ** > > The box just leaks, that I was wondering if they sold seals for it but > unfortunately I haven't found any. I figured I'd wait for winter to take it > off the road either way so I don't mind sending it off**** > > ** ** > ------------------------------ > > *From:* Denis Dodson <coocoo@xxxxxxx> > *To:* tcb@xxxxxxxxxxxxx > *Sent:* Tuesday, November 22, 2011 11:30 AM > *Subject:* [tcb] Re: Steering Box Rebuild**** > > James, see if you can find a gasket set (there may not be one, but maybe) > the box is very simple and easy to disassemble. If your steering is not bad > and it’s only leaking I would go with replacing the seals.**** > > **** > > You will have to send your box in and wait for them to send you one back > and they are $250 plus.**** > > **** > > *From:* tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] *On > Behalf Of *James Dwan > *Sent:* Tuesday, November 22, 2011 11:20 AM > *To:* tcb@xxxxxxxxxxxxx > *Subject:* [tcb] Re: Steering Box Rebuild**** > > **** > > Thanks!**** > > **** > ------------------------------ > > *From:* w.wood <evil.scientist.boo@xxxxxxxxx> > *To:* tcb@xxxxxxxxxxxxx > *Sent:* Tuesday, November 22, 2011 10:44 AM > *Subject:* [tcb] Re: Steering Box Rebuild**** > > You don't rebuild it, you get a rebuilt unit and install it. **** > > **** > > You can get one from Bus Boys and just pay the core charge. That way you > can R&R it in one go at a shop. I'd probably do the drag link and pivot > bushing as well at that time since you'll be tearing it apart.**** > > **** > > **** > > On Tue, Nov 22, 2011 at 9:21 AM, James Dwan <james_dwan_2000@xxxxxxxxx> > wrote:**** > > Has anyone had experience rebuilding a steering box on a splitty? Mine is > leaking like a sieve.**** > > I was told by a local mechanic that there is no literature available on > the size of the seals in the box and the best way to do it would be to take > it apart and source the parts after removing them to get measurements.**** > > **** > > Believe it or not this is the last thing I need done on this Bus to drive > it long distance!**** > > > > **** > > **** > > -- > My Email Moniker > http://www.findinternettv.com/Video,item,1570570433.aspx**** > > **** > > ** ** >