[tcb] Re: Heater Box
- From: "Andrew S. Barnes" <deabarnes@xxxxxxxxxxxx>
- To: <tcb@xxxxxxxxxxxxx>
- Date: Mon, 6 Oct 2008 12:33:18 -0500
They rectanglar port (ovalish) I have heard them called D shaped copper gaskets
about 2.5MM thick
Drew
----- Original Message -----
From: mechmark@xxxxxxxxxxx
To: tcb@xxxxxxxxxxxxx
Sent: Monday, October 06, 2008 11:54 AM
Subject: [tcb] Re: Heater Box
No, where I am talking about is where it meets up with the head.
-------------- Original message --------------
From: "Andrew S. Barnes" <deabarnes@xxxxxxxxxxxx>
The 2 Flanges have a 3 bolt triangle , towards the front of the motor there
is a rectanglar port going up for the blower motor and where the flapper valve
is round I think it's been slacked around with a hammer pretty good
Drew
----- Original Message -----
From: mechmark@xxxxxxxxxxx
To: tcb@xxxxxxxxxxxxx
Sent: Monday, October 06, 2008 9:10 AM
Subject: [tcb] Re: Heater Box
Is the heater box your looking for a square port or round port? I know
the 79 2 liter was a square port.
-------------- Original message --------------
From: "Andrew S. Barnes" <deabarnes@xxxxxxxxxxxx>
Help ,I am looking for a heater box 2.0L F.I. 78 GE case passenger
side . I've been trying to put the Heating system back together . It was
missing the flapper valve and the sheetmetal connecting the two but I got them
(i think) , I will be at T@P. If you can help please give me a call
(918) 721 3452
Thanks
Drew
Other related posts:
