[slikom] Nero
- From: "Milan Todosijevic Mike" <todosijevic021@xxxxxxxxxxxx>
- To: "slikom" <slikom@xxxxxxxxxxxxx>
- Date: Tue, 17 Aug 2004 17:13:22 +0200
Pozdrav svima.
Pronasao sam jedan po meni interesantan tekst za koriscenje Nero programa.
Tekst je na Engleskome, ali mislim da je bez veceg napora upotrebljiv, pa ga
prosledjujem.
I've pasted some notes below on using Nero to copy a CD. However, if you're
wishing to use Nero to rip tracks from a CD to your computer's hard drive,
then you need to experiment with the save tracks options. Personally, if
you're wanting to rip tracks to your hard drive from CD, I'd recommend using
CDEX to do this.
Notes on copying Cd's using Nero follow:
Using Nero to copy a CD
1. You can configure Nero to present the new compilation dialogue in
preferences. To do this:
a. Press Alt + F to open the File Menu.
b. Arrow down to Preferences and press enter
c. Press spacebar on the first checkbox to check start with New compilation
d. Tab to the OK button and press spacebar to save the settings.
2. Now when you start Nero, you will see the new compilation dialogue and
you will be placed on the multisession tab.
3. To copy a CD:
a. Press shift + tab until you reach the combo box that allows you to select
what task you wish to perform. This will usually be defaulted to CD-ROM
which is used for data compilations.
b. Arrow down in the list until you reach CD-Copy
c. You will now be placed in the Burn tab. If you have used Nero to copy a
number of CD's you won't need to change anything on any of the other tabs
but it is useful to review the details.
d. Press shift + tab until you reach the Burn tab and then use your left
arrow to move through the tabs until you reach the Image tab.
e. Use the tab key to review the controls on this tab. The only two real
controls of interest are the "Delete image after burning" and the path to
which the image file will be saved. If you are unlikely to burn multiple
copies of CD's at a given time then it is recommended that you check the
delete image control. However, if you do wish to burn multiple copies of a
CD then you may wish to save the image and burn from this later rather than
have Nero read the source CD again to perform the subsequent copies.
f. Press tab until you reach Image tab again and use the right arrow to
review the next tab.
g. The Copy Options tab again has two controls that are of interest. The
"on the fly" control and the combo box that allows you to select which of
your drives will be used for the source CD. Best results are obtained by
allowing Nero to create an image of the source CD so it is advisable to
uncheck the "on the fly" control. Ensure that the drive where you have
inserted your source CD is selected in the combo box. Nero will already
have detected your burner.
h. Press tab until you reach Copy Options tab and then use the right arrow
key to review the next tab.
i. Most of the controls on the Read Options tab will be set as required by
default. However you may wish to tab to the "Use jitter correction" control
and check this to obtain best results. This will slow the copy down but it'
s worth the extra time needed to get the best copy possible.
j. Press tab until you reach Read Options tab and use the right arrow to
review the controls on the next tab
k. The Burn tab has a number of controls of interest. Best results are
obtained by checking the check box for "Determine maximum speed" and
"Simulation". Check the check box to "Write" check box and select the speed
at which you wish to burn in the combo box. Best results are achieved by
slowing the burn down as slow as your patience will allow. Set the write
method to disc-at-once if it is not already selected, set the number of
copies as appropriate and tab to the Copy button.
l. If you have your source CD and a blank CD in your drives, press spacebar
to begin the Copy.
4. It is advisable to close all other running applications before starting
the burn as the process is very processor intensive.
5. If you would rather not have Nero start with the new compilation dialogue
or you accidentally dismiss the dialogue before starting the copy, you can
open the dialogue from the file menu.
a. Press alt + F to open the File Menu
b. Arrow down until you reach CD-Copy and press enter
c. Follow the instructions as outlined above
6. If you have the Nero wizard enabled then you will see a subset of the
controls detailed here but for those that are offered to you by the wizard,
the same principles apply.
Todosiyevich Milan
-----
Other related posts:
