The first step is wrong. You need to press Ctrl+F1 to open the access menu, not Alt+F2. The rest of the instructions stand. Press Ctrl+F1 to open the access menu. Down Arrow until you hear Staff Names. Press enter, then go to whichever staff you want to change the name. In the edit fields marked full instrument name and short instrument name, type the desired name you want to have Then tab to the "Change Button". Press the spacebar or enter Dan Rugman Visit www.musicaccess.co.uk for visually-impaired musicians and home of Sibelius Access -----Original Message----- From: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Carlson Sent: 27 March 2010 15:02 To: sib-access@xxxxxxxxxxxxx Subject: [sib-access] Re: writing metronom mark, and the incert instruments Ramy, Here's something that Annabel contributed: Changing instrument name in score and parts Go to System Items by pressing Alt+F2. Down Arrow until you hear Staff Names. Press enter, then go to whichever staff you want to change the name. In the edit fields marked full instrument name and short instrument name, type the desired name you want to have Then tab to the "Change Button". Press the spacebar or enter Dave ----- Original Message ----- From: "Ramy Moustafa" <moshtaqlealganna@xxxxxxxxx> To: <sib-access@xxxxxxxxxxxxx> Sent: Saturday, March 27, 2010 02:15 Subject: [sib-access] Re: writing metronom mark, and the incert instruments Hi dave: Thank sso much. But, Concerning my instrument question, I need to incert an instrument, even in the start of a score, the dialogue to select a familly, an instruments etc, can't read by jaws while using errows, u must hit incert 5 to read the word, why is this? And please, how can I rename an instruments after finishing a score? or if I incert just a tribble clef, as I have some oriental instrumentals that r not in sibelius, how can I write a name for this instrument? Thanks so much Cheers Ramy oustafa If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx