[sib-access] Re: solved: Re: Re: can't get plug-in to run
- From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
- To: <sib-access@xxxxxxxxxxxxx>
- Date: Wed, 21 Oct 2009 15:45:15 -0400
Oh don't worry about that. I'm just weird with my shortcut combos because I
have so many with all the betas and all.
Gord
----- Original Message -----
From: "Dan Rugman" <sib-access@xxxxxxxxxxxxxxxxx>
To: <sib-access@xxxxxxxxxxxxx>
Sent: Wednesday, October 21, 2009 1:55 PM
Subject: [sib-access] Re: solved: Re: Re: can't get plug-in to run
That's about as complicated as it can be because Sibelius only allows for
the control, shift and alt keys to be used as modifiers.
The keystroke needed to be one which wouldn't cause problems on Non-English
keyboards and which wasn't being used by Sibelius. I didn't use any of the F
keys because I want to keep those clear for a possible future development.
Dan Rugman
visit the new on-line resource for visually impaired musicians and home of
Sibelius Access.
www.musicaccess.co.uk
-----Original Message-----
From: sib-access-bounce@xxxxxxxxxxxxx
[mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Claudio Sacco
Sent: 20 October 2009 15:17
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] Re: solved: Re: Re: can't get plug-in to run
Excellent. Then Dan should imagine an even more complicated shortcut to run
the plugin.
Cheers
Claudio
> -----Original Message-----
> From: sib-access-bounce@xxxxxxxxxxxxx
> [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Gordon Kent
> Sent: Tuesday, October 20, 2009 4:13 PM
> To: sib-access@xxxxxxxxxxxxx
> Subject: [sib-access] solved: Re: Re: can't get plug-in to run
>
> Well, I finally figured out what was happening. I was using alt ctrl
> shift 0 as my shortcut to launch jaws 10. Changing the keyboard
> shortcut solved the problem.
> Gord
If you wish to unsubscribe, send a blank message with the single word,
unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
