Oops, sorry; I just saw your correction, Dmitry. Thank you. I'll try
this. Because until now I used Sibelius Access only with the earlier
version of JAWS I have: version 12. So I was asking myself whether
using Sibelius Access with the JAWS version I otherwise use, version
15, would result in any difference.
Anyhow, thank you.
And yeah, I guess I am technically challenged.:)))
Cheers
Vytautas
On 9/13/16, Vytautas Jr. Bucionis <vyt.bucionis@xxxxxxxxx> wrote:
So for JAWS 14, you can copy directly from the source, whereas forIf you wish to unsubscribe, send a blank message
JAWS 15, it's better to copy from an earlier version of JAWS. Am I
getting this?
Cheers
Vytautas
On 9/13/16, Alexandru Cozaciuc <alexandrucozaciuc@xxxxxxxxx> wrote:
But I copied the JAWS Braille scripts from JAWS 14 and I had no other
problems.
-----Original Message-----
From: Dmitry Budnikov
Sent: Tuesday, September 13, 2016 10:30 AM
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] Re: latest JAWS version compatible with Sibelius
access
Hi, again!
I am sorry, I just have misinformed you about the scripts. You still need
to
recompile them in jaws 15. So all what you need is
1. Install scripts as you usually do.
2. After installing the scripts start Sibelius. Ignore any error messages
which Jaws may produce.
3. Press ins+0 to open Jaws script manager.
4. Press ins+t to make sure that jaws loaded exactly the "sibelius5.jss"
file in script manager.
5. Find and comment the following lines:
use "JAWS Braille.jsb"
and
use "fhp.jsh"
To comment the line just press the ; symbol at the beginning of the line.
6. Recompile scripts by pressing ctrl+s.
7. Close the script manager and restart Sibelius.
8. From now on everything should be more or less suitable for work.
Hope that this time I told everything and didn't forgot anything.
Regards,
Dmitry
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
