Check the repeat barlines and 1st and 2nd endings. If the repeat barlines
are not paired correctly and the last ending line is not open, then this
means that Sibelius is confused about bar numbering.
HTH,
Alex
-----Original Message-----
From: Dale Lieser
Sent: Wednesday, November 23, 2016 10:44 PM
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] Re: bar numbers missing
I cannot understand why you are encountering the problem. However, go into
the layout menu, engraving options, bar numbers. Something there should
help, I would think.
On Nov 23, 2016, at 2:54 PM, Michael Arnowitt <MA@xxxxxxxxxxx> wrote:If you wish to unsubscribe, send a blank message
I have a problem with missing bar numbers in my score. Every bar after bar
37 has no bar number associated with it, and according to a sighted
friend,
it's not just that it isn't being spoken aloud, they have also disappeared
from the visual display.
This is what I did before the problem started, although I have no idea why
what I did should cause any result like this.
I pressed control and highlighted bar 16, then shift and highlighted bar
37.
I copied and pasted after 37, which should insert all these measures there
and push bar 38 etc. behind the pasted in material.
Now all the measures after the original bar 37 have no bar numbers
associated with them. I cannot even add a single bar in a normal way (alt
+
b) after 37 without the same result. I cannot think of what might be
special
about this bar 37, it has a few notes and an end repeat sign.
I tried going into bar 38 and create > other > bar number change and
within
that dialog box tried both the option to follow previous bar and the
option
to start a new number, neither solved the problem. When I navigate to what
should be bar 38, Sibelius Access says "bar number change", but does not
say
38 as I asked it to.
Obviously I am doing something wrong, but I feel I've done this many times
before without this problem. If anyone can suggest something to try or a
workaround, many thanks.
Michael
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
