[sib-access] Re: Windows need fixing when tabbing in mixer
- From: "Claudio Sacco" <cl.sacco@xxxxxxxx>
- To: <sib-access@xxxxxxxxxxxxx>
- Date: Sun, 21 Sep 2008 09:15:38 +0200
Dear Dan
Here is a little feedback concerning the mixer, but not a technical one. I
was bored for a very, very long time, that my sounds in Sibelius were to
soft and JAWS compared to them much to loud. With your scripts I was able to
change that behaviour and make Sibelius sounds louder. I'm so happy with
ghis feature.
With many thanks
Claudio
-----Message d'origine-----
De : sib-access-bounce@xxxxxxxxxxxxx
[mailto:sib-access-bounce@xxxxxxxxxxxxx] De la part de Dan Rugman
Envoyé : samedi, 20. septembre 2008 22:46
À : sib-access@xxxxxxxxxxxxx
Objet : [sib-access] Re: Windows need fixing when tabbing in mixer
Kevin,
I've noticed this problem too but you should be able to press CONTROL+M a
second time to settle things down.
The problem is that the mixer window is a bit slow opening the first time
around. Unfortunately, the JAWS function which detects the state of the
window is reporting that the window is open even though it hasn't opened
yet. I'll do some more testing and try to pin this down.
I'm glad that you're trying out this feature because I need some feedback on
the way I've set this up.
Dan Rugman
Visit www.musicaccess.co.uk
The new on-line resource for visually impaired musicians and home of
Sibelius Access.
-----Original Message-----
From: sib-access-bounce@xxxxxxxxxxxxx
[mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin Gibbs
Sent: 18 September 2008 18:21
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] Windows need fixing when tabbing in mixer
Dan,
For the first time ever, whenever I tab around in the mixer window,
I get the "Tool Windows Need Fixing." message. Using CTRL F1 fix tool
windows closes the mixer. What's going wrong?
Kevin
If you wish to unsubscribe, send a blank message with the single word,
unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message with the single word,
unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
