hi dear: Yes, i have slow response from jaws, as a matter of fact, i don't know what to use to navigate, errows, or the tap. but when using the errows, its very very slow, i shall try it on my studio tomorrow, cause here, i'm running in on my dis top machine, pentiam 4, 512mb of ram, jaws 8. sibelius 5.2 did dan, solve u your problem? Cheers Ramy Moustafa ----- Original Message ----- From: "Vytautas Jr" <vyt.bucionis@xxxxxxxxxxxx> To: <sib-access@xxxxxxxxxxxxx> Sent: Tuesday, January 06, 2009 2:16 AM Subject: [sib-access] Re: Stop blug in > Hi Ramy, > > This is quite interesting, since you are the first person after myself > whom > I hear of having this "stop-plug-in dialogue" issue. Just curious: do you > experience slow responses from jaws when you navigate? The source of this > problem in my case, it became clear, is that the plug-in that triggers > response from JAWS, the access plug-in, occurs twice after each move > instead of once, and there is an option to stop it if it runs too long, > which seems to be the case. Also, on what kind of machine do you run > Sibelius? Dan wrote earlier as a response to my question on the same > issue > that he actually tested this plug-in and got good results. The fact that > it > doesn't happen on his machine nor on that of anyone else on this list > except you and me, that must mean that it is more likely to happen on some > machines than on others. Is your machine a Laptop? > > When you go to the next item, does it happen to you that sometimes the > item > you just left is announced instead? > > > Cheers > Vytautas > > -----Original Message----- > From: sib-access-bounce@xxxxxxxxxxxxx > [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Ramy Moustafa > Sent: 5 janvier 2009 17:26 > To: sib-access@xxxxxxxxxxxxx > Subject: [sib-access] Stop blug in > > hi all: > > if u please, > > when i need to navigate in sibelius 5 with the sib-access, i got message > stop blug in dialogue, > and the message disappear, > > what is this.. > thanks > Cheers > Ramy Moustafa > If you wish to unsubscribe, send a blank message > with the single word, unsubscribe - in the Subject line to: > sib-access-request@xxxxxxxxxxxxx > > If you wish to unsubscribe, send a blank message > with the single word, unsubscribe - in the Subject line to: > sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx