Hi on the list
Thank you for the answers regarding installation of Jaws 13 for use with
Sibelius 5.25 with Access on my Windows 7 computer. I now am aware of other
versions of Jaws must be uninstalled before installation of Jaws 13.
My Windows 7 computer is a 32 bit device; are there any other actions that have
to be done in relation to further installation?
Kindest regards, Jan Bruun
-----Oprindelig meddelelse-----
Fra: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx] ;
På vegne af Farfar (Redacted sender "dgcarlson" for DMARC)
Sendt: 18. november 2016 20:29
Til: sib-access@xxxxxxxxxxxxx
Emne: [sib-access] Re: Sibelius 5.25 + Windows 7 + JAWS 17 Issue
Dimitri,
Thanks for confirming that. I was pretty sure.
Farfar Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer
----- Original Message -----
From: "Dmitry Budnikov" <6021635@xxxxxxxxx>
To: <sib-access@xxxxxxxxxxxxx>
Sent: Friday, November 18, 2016 10:24
Subject: [sib-access] Re: Sibelius 5.25 + Windows 7 + JAWS 17 Issue
Hello All!
Uninstalling Jaws17 before installing earlier version of Jaws is absolutely
essential step. Otherwise you are about to crash video chain and in most
cases you will have to restore or reinstall the whole windows. After
installing jaws 12 or 13 jaws 17 can be installed again with no problem..
-----Исходное сообщение-----
From: Farfar (Redacted sender "dgcarlson" for DMARC)
Sent: Friday, November 18, 2016 6:25 PM
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] Re: Sibelius 5.25 + Windows 7 + JAWS 17 Issue
I suggest you go back to an earlier version of JAWS on that Win 7 machine.
JAWS 17 started using different methods for its underlying operation and
I've noticed a difference in Sibelius, as well. I run Sibelius on my XP
machine with a JAWS version no higher than 13. Hopefully you will be able to
install a lower version of JAWS on that Win 7 machine, such as 12 or 13.
I don't know if you will need to uninstall JAWS 17 first, before installing
an older version. But I'm sure you can then install JAWS 17 in addition to
an older version. I have JAWS 11, 12, 13, 15, 17, and 18 on this Win 7
machine.
Farfar Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer
----- Original Message -----
From: "Jan Bruun" <jan.bruun@xxxxxxxxxxx>
To: <sib-access@xxxxxxxxxxxxx>
Sent: Friday, November 18, 2016 02:03
Subject: [sib-access] Sibelius 5.25 + Windows 7 + JAWS 17 Issue
Hi Dave.
I have an old computer with Win XP, Sib. 5.25 and JAWS 9, and it works
perfectly. Sib. reads the note names when I mark them. and the menus work
and respond when I select them.
I installed Win 7 and Sib 5.25 two years ago along with Access on my new
computer, and suddenly Sibelius doesn't read the note names (it does play
them) or read the text when I select it. Also the menus doesn't respond to
my commands. E.g. if i try to put a textbox under a note. Nothing happens.
Sibelius does read the menus, and the commands, but nothing happens, when I
select the menu.
What is up?
Sincerely
Jan Bruun
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
