I did not even think of that. guys , I'm not very good at thinking on my feet when I'm in a hurry. Lol. Thanks for the suggestion I will deffinatly try that. S -----Original Message----- From: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Carlson Sent: Saturday, February 06, 2010 10:01 PM To: sib-access@xxxxxxxxxxxxx Subject: [sib-access] Re: [Bulk] Extracting parts Sarah, As for multi-bar rests, you can select the range, then use one of the plug-ins to generate them. I don't remember exactly how we did them in Sib 3, but vaguely recall something in the print dialog for printing separate parts. That's all different now in Sib 5. As to printing selected staves, I think you could just hide the staves you don't want to print and that should do it. Give it a try. Dave ----- Original Message ----- From: "Sarah alawami" <marrie12@xxxxxxxxx> To: <sib-access@xxxxxxxxxxxxx> Sent: Saturday, February 06, 2010 20:03 Subject: [Bulk] [sib-access] Extracting parts Ok I jut want to print the coral parts not the piano to make it easier for the choir to read nd count rests. How do I do this in sib 5? I fiind no extract in the files menu. Is this impossibal, also will it have for example that thing where it will say the number of rests so that you don't' hae to count them I remember doing something like that in sib 3. Take care. Sarah alawami MsN: chellist@xxxxxxxxxxx AIM: kales2@xxxxxxx skype: marrie1 twitter: http://twitter.com/marrie1 website: http://www.marrie.org If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx